Leave Your Message
-
Phone
-
E-mail
-
Whatsapp
-
WeChat
Explore our primary drilling fluid recovery equipment engineered to meet API 13C screen standards, EPA environmental guidelines, and heavy-duty horizontal directional drilling requirements across the United States.
Compact mud recycling systems for horizontal directional drilling, civil engineering, microtunneling, and trenchless pipeline projects across Texas, California, and Midwest infrastructure corridors.
100% pneumatic high-vacuum transfer pump handling high-gravity solids, oily cuttings, drill mud slurries, and bottom sediment in US oilfield remediation & pit cleaning.
Heavy-duty continuous auger conveyor designed for transferring dry drilling cuttings from shale shakers to high-G drying shakers and waste collection skips in closed-loop systems.
Helical-bevel geared slurry agitators preventing solid sedimentation in active mud compartments, ensuring uniform drilling fluid density during deep horizontal drilling runs.
The drilling industry across the United States is navigating an era defined by extended-reach horizontal wells, multi-well pad drilling, and intensified regulatory standards under EPA Subtitle D and state water resource commissions.
From the high-density unconventional shale plays of the Permian Basin (Delaware and Midland Basins in Texas and New Mexico) to the Eagle Ford, Bakken Shale (North Dakota), and Marcellus & Utica natural gas basins (Appalachia), solids control equipment is the primary line of defense protecting expensive drilling fluids, maximizing rate of penetration (ROP), and mitigating environmental waste handling overheads.
Simultaneously, the US civil infrastructure sector is undergoing unprecedented expansion driven by federal grid modernization, broadband fiber optic rollouts, and underground municipal utilities. Horizontal Directional Drilling (HDD) contractors demand modular, trailer-mounted mud recovery systems capable of rapid mobilization, quiet urban operation, and high-efficiency bentonite recycling.
As US drilling contractors prioritize automated rig operations and ESG metrics, modern solids control machinery is transitioning toward intelligent automation, variable frequency drive (VFD) optimization, and Zero Liquid Discharge (ZLD) architectures.
Modern decanter centrifuges utilize smart PLC interfaces and real-time torque feedback sensors to dynamically adjust differential bowl speeds and feed rates, preventing rotary blockage and optimizing ultrafine colloidal solids extraction down to 2-5 microns.
Innovative linear and balanced elliptical motion shakers generate up to 8.0G of acceleration. Continuous screen deck angle adjustment allows American operators to adapt quickly when transitioning through diverse shale formations and high ROP sections.
With water scarcity in West Texas and strict discharge regulations across the US, closed-loop dewatering systems recover up to 95% of water phase chemistry, drastically slashing trucking, freshwater procurement, and chemical barite replenishment budgets.
Established in 2010, TR Solids Control is a professional manufacturer specializing in drilling fluid solids control equipment and integrated solutions. We are dedicated to the design, manufacture, sales and services of solids control systems, following strict quality standards and providing reliable products, professional support and fast response for global customers.
During the past years, together with our experienced engineering team and strong supply chain partners, we have supported drilling contractors, oilfield service companies and industry partners across North America, Middle East, Africa, Russia, South America, Southeast Asia and other regions, delivering efficient solids control solutions for various drilling operations.
For the United States market, our machinery is precision-engineered to integrate seamlessly with standard US rig footprints, skids, and electrical specifications (480V, 60Hz 3-phase, explosion-proof motors conforming to UL and NEMA standards). Whether supplying standalone replacement equipment or fully containerized mud systems, TR Solids Control guarantees peak durability under relentless field duty.
Our solids control apparatus is built to operate under harsh American environmental extremes—from sub-zero North Dakota winter drilling in the Bakken formation to 115°F summer operations in the West Texas desert.
| Application Sector | Key US Geographic Hubs | Typical Solids Control Equipment Suite | Primary Engineering Objective |
|---|---|---|---|
| Unconventional Shale Oil & Gas | Permian Basin (TX/NM), Eagle Ford (TX), Bakken (ND), Haynesville (LA) | High-G Linear Shakers, Mud Cleaners, Variable Speed Decanter Centrifuges, Cuttings Dryers | Maximize ROP, reduce low-gravity solids (LGS) below 4%, recover synthetic base fluids. |
| Trenchless HDD Pipeline Crossings | Gulf Coast, Midwest River Crossings, Northeast Corridors | Compact Mud Recycling Systems, Desanding Hydrocyclones, Slurry Mixing Hoppers | Rapid bentonite slurry regeneration, clean sand removal down to 40μm, minimal urban footprint. |
| Geothermal Energy Drilling | Imperial Valley (CA), Great Basin (NV), Utah | High-Temperature Rated Mud Agitators, Centrifugal Feed Pumps, Heavy-Duty Centrifuges | Handle high-temperature abrasive geothermal fluids, scale removal, continuous cooling fluid flow. |
| Hydrovac Slurry & Environmental Mud Processing | Pennsylvania, Ohio, Texas Industrial Service Corridors | Pneumatic Sludge Vacuum Pumps, Screw Conveyors, Flocculation & Dewatering Units | Rapid hydrovac slurry dewatering, regulatory-compliant landfill cake dryness, water recycling. |
Manufacturing excellence underpinned by state-of-the-art CNC machining, robotic plasma cutting, shot blasting, dynamic balancing facilities, and globally recognized certifications.
Review our comprehensive array of solids control machinery, mud circulation systems, centrifugal slurry pumps, and auxiliary transfer equipment designed for high-uptime drilling operations.
Integrated multi-stage bentonite slurry reclamation unit comprising shale shaker, hydrocyclone desander/desilter, and centrifugal feed pump on a compact footprint.
Compressed air-driven high-suction vacuum unit with zero rotating components in the wet path, moving high-viscosity sludge, drill cuttings, and hazardous slurries safely.
Wear-resistant flighting available in custom lengths (12ft to 48ft) designed to convey drilled solids efficiently from rig shaker troughs to collection containers or drying skids.
Explosion-proof motors (5.5kW to 22kW) mated with heavy-duty worm or helical reduction gearboxes providing powerful fluid shearing and tank homogeneity.
Second-phase separation hydrocyclone system (10" or 12" cones) efficiently removing abrasive sand particles between 45 and 74 microns to protect downstream equipment.
High-chrome cast iron open-impeller slurry pump, 100% interchangeable with industry standard designs, delivering high volume feeding for desanders, desilters, and mud hoppers.
Pre-plumbed, fast-rig-up skid package combining linear shakers, desander cones, agitators, and electrical control panels designed for rapid highway transport across US states.
Integrated cuttings handling setup including screw feeders, pneumatic vacuum transfer pumps, and high-G drying shakers for total drilling waste management.
In the competitive US energy and infrastructure ecosystem, equipment uptime and lower total cost of ownership (TCO) dictate profitability. Here is how our engineering directly addresses field challenges:
Eliminate middle-tier distributor markups with direct OEM factory sourcing. Save up to 35% on complete mud systems, high-speed centrifuges, and replacement API composite shaker screens without compromising quality.
All control panels and electric motors are configured to 480V / 60Hz 3-phase power with UL-listed electrical components, NEMA 4X weatherproofing, and Class 1, Division 1 explosion-proof ratings for hazardous location deployment.
Our hydrocyclones, centrifugal pump wet ends, agitator impellers, and shaker screen wedge blocks are engineered to be 100% interchangeable with prevailing US industry standards, guaranteeing effortless field maintenance.
Whether you are expanding a drilling fleet in the Permian Basin, upgrading mud tanks for HDD infrastructure projects, or seeking custom OEM solids control manufacturing, our technical engineering team is standing by to assist with CAD designs, flow schematics, and competitive price quotations.